Sandvik CH550 Cone Crusher Parts Database

Typical specs: Mn14/Mn18/Mn21 (mantles/concaves), CuSn12 bronze (spider/eccentric bushings), 42CrMo4/4140 (shafts, gears, pins), and HARDOX 400/450 (liners). Material can be tuned to your ore abrasiveness and feed profile.

Weights vary by casting batch, material grade, and revision. To avoid errors, we provide certified shipping/nominal weights after confirming part no., revision, and material selection.

Absolutely. We can adjust Mn content, add alloying, modify heat-treat curves, or apply wear overlays/coatings based on your CSS, feed hardness, moisture, and target throughput.

Spectral chemistry, hardness, metallography, and heat-treatment validation on each batch; dimensional checks on critical surfaces; traceable inspection records included on request.

Material certificates, hardness/HT records, dimensional reports (for critical parts), packing lists, and photos. CE/CO, third-party inspection (SGS/BV), and test reports available if needed.

Common wear profiles (M1/M2/M7) are stocked or short-lead. Large assemblies and non-standard profiles are made to order. MOQ depends on the item—share your part numbers for a quick check.

Yes. We supply standard A/B/EF/F/M/MF/MC/EC profiles and FlexiFeed options. We can cross-reference OEM numbers and recommend profiles based on application (secondary/tertiary).

Export-ready crating with rust protection, labeled by part no. and kit. EXW/FOB/CIF/DDP available. We arrange sea/air/rail per urgency and provide photos + packing lists before dispatch.

Workmanship and material defects are covered. If a part fails prematurely due to manufacturing issues, we will replace or credit after joint failure analysis.

Send part numbers, descriptions, desired material/profile (if any), and destination. If unsure, share machine model/serial, CSS, and feed details—we’ll propose a parts list and lead times.

Yes. Provide clear photos, rough dimensions, and the machine nameplate. We’ll reverse-identify and confirm with drawings before production.

We provide torque specs, seating/burn-in guidelines, and grease/oil recommendations for bushings and bearings. Remote technical support is available during commissioning.

Not recommended. Keep metallurgy consistent across a set to ensure uniform wear, predictable nip angle, and stable product curve.